1KW 48V wind solar hybrid MPPT (boost) controller, LCD, RS232, dual 12A output

This is 1000W 48V MPPT BOOST Model with Dump Load and
RS232 Communication Port.

1 . Comprehensive introduction of products

1-1 Basic information

Super-intelligent wind/solar hybrid controller is a new type of special high performance control device for new energy application which is designed on the basis of ultra high performance controller. It contains many years of application experience (such as waterproof, dust-proof, salt spray, wiring error, wind resistance limit control of Wind turbines, energy management etc.), it has done to ultimate no matter it applied to the charging control or street light control. In order to meet variety of applications, the controller adopts a hierarchical and modular structure, all functions can be achieved with different functional plates according to actual application, and it is convenient for rapid customization and application.

1-2 Characteristics

Waterproof

Three defenses for circuit board, hierarchical design, even if small amount water enters, it will not damage the device

RS232 communication

Standard configuration RS232 communication, it is easy to do the monitoring with the computer software. (RS485, short-range wireless is optional). Using a USB to RS232 members, more convenient to exchange data with a computer (computer with USB interface can be used).

Safety wire connecting

Terminals are treated with injection molding process, wiring short circuit and cross will not occur, more safety for customers’ operating.

Automatically alarming of battery reverse

Battery input terminal will not be damaged with continuous reverse, and it has buzzer alarm. Avoid equipment damage and fire caused by wiring errors, and better protect the battery.

Automatically alarming of Photovoltaic panels reverse

Photovoltaic panels will not be damaged with continuous reverse, and it has buzzer alarm. It will not cause wiring errors especially when work at night. (Note: reverse connection detection in the night needs manually keys intervention)

Continuous short-circuit output protection

Discharge output terminal has continuous short-circuit protection, and over current protection. It is recovered after the abnormal excluded. Avoid damage of the controller or fire caused by electrical equipment fault (especially the short circuit).

Patented Wind turbines steady speed generation control technology

Patented Wind turbines steady speed generation control method, which makes the Wind turbines not run with super speed, the Wind turbines can keep generation with a limited set speed even in the high winds, avoid direct stop of Wind turbines with over speed caused by strong wind. Greatly improve the Wind turbines generation energy and keep the safe running of the Wind turbines.

Patented Wind turbines stall current limit control technology

Patented Wind turbines stall current limit control methods, which makes Wind turbines not run over current, avoid the damage of expensive generator caused by heating due to over current.

Wind turbines input MPPT generation technology (boost)

Controller can provide automatically Wind turbines input maximum power tracking mode, or the 5 segments match curve input configuration mode(input rev to input current; or output voltage to input current curve), which makes the high efficient generation of the Wind turbines, but with low speed.

Support multiple output mode selection

This controller provides optional multiple output modes (light control, time control, light on in the morning, PWM dimming, reverse direction), which can satisfy a variety of applications.

Statistics the cumulative generating capacity, remaining power, speed, current, temperature and other data

The controller screen displays not only the current, voltage, power of conventional Wind turbines, PV, battery, and the output terminal; but also the cumulative generating capacity of Wind turbines and PV, the remaining battery power, Wind turbines speed, unloading current, and the temperature of controller.

Alarm function when terminals up

When the terminals are up, the controller will alarm, which requires customers to use with the correct install direction, avoid the possibility of damage caused by water comes into the controller when used in the open air or due to bad weather.

2.Product Parameter

3. Installation process

[SOLAR INPUT]—–Input terminal of solar panel, pay attention to the wiring polarity

[BAT INPUT ]——Input terminal of battery, which is applicable to the 48V level battery, pay attention to the wiring polarity

[WIND INPUT ]—–AC input terminal of the Wind turbines, non-polarity input

Attention: suggest doing wiring according to below order:

1. connect with battery 2. connect with solar panel 3. connect with Wind turbines

4 Parameters setting instructions

1. Functions of key

The controller enters into the work standby status ([RUN] words flashing) as soon as it is powered and initialized. The controller displays different information according to the different function types, the specific kind to prevail.

Definintions of the buttons on the panel:

2. LCD screen display

LCD screen can display the following information:

1. Mains electricity supply, displayed when mains electricity exits

2. Wind turbines graph, the graph rotates when the rotate; when brakes, displays brakes box

3. Daytime, night indication symbol. In the daytime displays sun, at night displays moon.

4. Communication display symbol, temporarily retained

5. Battery voltage level symbol, 12V displays 12; 24V displays 24; 48V displays 48

6. Wireless communication display, displays the symbol when has wireless module, displays dynamic symbol during communication

7. The No.1 output status display, when close the output, the symbol not light, otherwise, the symbol light. When short circuit, short circuit symbol displays; when has morning lighting function, and in the state of waiting for morning lighting, light symbol flashing indicates waiting.

8. The No.2 output status display, when close the output, the symbol not light, otherwise, the symbol light. When short circuit, short circuit or over loading and such abnormalities, abnormal symbol displays; when has morning lighting function, and in the state of waiting for morning lighting, light symbol flashing indicates waiting(for normal output). If used LED driver module output, then LED symbol displays

9. Solar MPPT symbol, displays when has solar MPPT components, the symbol flashing when the MPPT works

10. Wind turbines MPPT symbol, displays when has Wind turbines MPPT components, the symbol flashing when the MPPT works

11. PV parameter symbol

Wind turbines parameter symbol

Battery parameter symbol

LED drive output parameter symbol

No.1 output parameter symbol

No.2 output parameter symbol

Temperature symbol

Rev symbol

12. Digital display parameter / status symbol

13. Parameter setting symbol

14. Parameter unit

15. No. 1/2 output/ close status display symbol, displays when has output module, ON corresponding to output open status, OFF to the close status

16. Battery status symbol, displays the rest battery power, after over voltage, displays the over voltage symbol

17. Data checking symbol

The cable above is optional.

Some parameters are adjustable. If you want to adjust them in computer by yourself, please order the communication cable by choosing the option “with comm cable“.