Type 1: ABS plastic anemometer no. 1
Type 2: ABS plastic wind plastic instrument no. 2
Type 3: Aluminum pulse anemometer
Type 4: Aluminium alloy anemometer
Type 5: Plastic wind cup +10m cable
Type 6: Aluminum alloy wind cup +10m cable
Type 7: Precise pulsed blades
ABS plastic number 1, only show the wind level
ABS plastic number 2, display wind level, wind speed, more than the warning wind level will alarm
Aluminum alloy anemometer, aluminum alloy wind cup, display wind level, wind speed, more than the warning wind level will alarm
Aluminum pulse anemometer, the use of pulse sensor, data transmission is more stable, more accurate, not easy to be disturbed, display wind level, wind speed, more than the warning wind level will alarm
1. Wind speed indicator
Wind speed measurement range: 0-56m/s, 0-12
Accuracy :<56 m/s ± 2%
Wind speed sensor starting wind speed: <0.7 m/s
Parameters that can be displayed: actual wind speed, wind force, gust, temperature
2. Alarm limit value (factory setting of the instrument) : the jacking state is (level 4) and the working state is (level 8). The limit value can be adjusted according to customer requirements (optional).
3. Pulse output 0-800Hz (0-56m/s)
4. Working environment temperature:
Host :-30℃ to 65℃
Inductor :-30℃ to 65℃
Anemometer system composition
Self alarm circuit
When the wind speed exceeds the warning wind speed, the sound will automatically alarm, power off at the same time, remind the staff attention
Product Features
1. The motherboard core adopts the self-developed MS51 MCU motherboard and its supporting standard 1/0 board card, plus the corresponding signal conditioning module, which can flexibly change the data collection and output control and further improve the reliability
2. Low power consumption, all digital circuits adopt CMOS chip
3. With memory function of power off, it can work continuously for a long time
4. Strong anti-electromagnetic interference function
5, the instrument backboard wiring port is convenient, strong compatibility
6. Sound alarm function
7. Install and debug all keyboard operations to bring convenience to users after changing anemometer parameters
Instructions for use, field installation, debugging and use
1. Main engine installation: The main engine installed in the tower cab should be fixed in an appropriate position with good stability.The main engine should be fixed firmly in the cab of the tower crane. The vibration and turbulence of the tower crane should be fully considered to ensure that the main engine cannot become loose in use.
2. Installation of anemometer sensor: The anemometer sensor is installed above the tower crane cab and fixed (it can be supplemented by fixing if necessary).After installation of the anemometer sensor, the installation position shall be level and the tower crane will not fall off during operation (wind cup sensor size: 220*87*230mm).
Instructions
Setting: This button is for wind warning setting. When the wind warning level is set to level 6 in advance (the product has been set before leaving the factory), each time the button is pressed, 0.5 can be set in turn, and the maximum can be set to level 12. The circuit can give corresponding alarm linkage output
Directions for use
In normal operation: window wind speed display the current real-time wind speed;Press the wind speed and wind speed button to switch, and the display is the wind speed level in setting operation: the window displays the wind speed alarm value. When it reaches the preset early warning wind level, it starts flashing and gives an alarm sound
Matters needing attention
1. Before use, it is necessary to check whether the products (including plugs and flexible wires, etc.) are damaged and pay attention to check whether the power supply is normal
2. It is forbidden to install the products in the environment of hot and humid, dust or flammable and corrosive gases
3. Please disconnect the power supply before wiring
4. Plug and socket should be firmly connected to avoid loosing.Plug and socket is loose, causing poor contact and fever, and a long period of time may cause a fire using scene teng exhibition industry &trade anemometer is construction machinery (crane, crawler crane, door crane, tower crane, etc.), railways, ports, docks, wind power, photovoltaic power generation, power plants, meteorological, cableway, the environment, greenhouse, breeding and other fields for measuring wind speed of the device
Usage scenarios
Anemometer is used to measure wind speed in construction machinery (crane, crawler crane, door crane, tower crane, etc.), railway, port, wharf, wind power generation, photovoltaic power generation, power plant, meteorology, ropeway, environment, greenhouse, breeding and other fields
‘
Reviews
There are no reviews yet.